 |
 |
Press and hold the power key to power on the device |
During power on,The device display the CUB logo.
Software revision number
follows after the CUB logo.
Now the device is at the maker selection menu
| Relearn the vehicle with OBDII. This function require OBDII cable. |
Maker selection:
Use the arrow key
tobrowse alphabets of carmakers, and
press the " Enter " key
to select.
Maker selection:
Use the arrow key
to browse automakers, and press the " Enter " key to select.
Model selection:
Use the arrow key
to browse models, and press the " Enter " key
to select.
Year selection:
Use the arrow key
to select year and press the "Enter" key to select.
Function selection:
Use the arrow key
to select OBD II and press the "Enter" key
to select.
TPMS Data selection:
Press the " Enter " key
to delete previous stored TPMS data.
Press the " Esc" key
to keep previous stored TPMS data .
Diagnose sensor :
Sensor AID will now activate the sensor.
The respond time from the vehicle may vary
depending on MMY. Sensor AID will beep
after receiving sensor information.
Diagnose process:
Press the " Enter " key
to start diagnose. The flashing tire indicates
the tire position. Start Diagnose sensor starting from LF,RF,RR and LR.
Note: If the car is equipped with spare tire, spare
tire must be daignosed and relearn with the vehicle.
OBD II connect:
Insert OBD II module into the OBD II connector of the vehicle and turn on ignition by using the "Enter" key to start. The following screen
will display.
Read Car ID:
Use the arrow key
to Select "Read Car ID " and press the
" Enter " key to select.
Read Car ID process:
Sensor AID is now starting the communication with the vehicle.
Read Car ID complete:
After Sensor AID successfully extract IDs
from the ECU, you will hear 2 short beeps.
\
Write Car ID:
Use the arrow key
to select " Write Car ID " and e press the
" Enter " key to select.
Write Car ID process:
CUB Sensor AID is now starting the communication
with the vehicle.
Then CUB Sensor AID is overwriting the sensor ID in the ECU.
Write Car ID complete:
After CUB Sensor AID successfully overwrite the
sensor ID to the ECU, you will hear 2 short beeps.