 |
 |
Press and hold the power key to power on the device |
During power on,The device display the CUB logo.
Software revision number
follows after the CUB logo.
Now the device is at the maker selection menu
 |
Use arrow key to scroll up and down between maker |
Maker selection: Use the arrow key to browse alphabets of
car-makers, press the "Enter" key to select
Maker selection:
Use the arrow key to browse automakers,
press the "Enter" key to select
Model Selection:
Use the arrow key
to browse models, press the "Enter" key to select
Year selection:
Use the arrow key
to select year and press the "Enter" key to select
Note:
(OBD) means an activation tool in conjunction with a scan tool which is required to program new sensor ID’s into vehicle.
Function selection:
Use the arrow key
to Select Diagnose sensor and press the "Enter" key to Diagnose
Diagnosing Sensor:
Sensor AID will now activate the sensor, sensor respond
time may vary depending on sensor type and brand.Sensor AID will beep after receving sensor information
| The picture below is an example of sensor data communication result NOTE - The Sensor AID will identify the sensor information that is transmitted.Not all sensors transmit every piece of information shown. |
