Press and hold the power key to power on the device
During power on,The device display the CUB logo.
Software revision number follows after the CUB logo.
Now the device is at the maker selection menu
Use arrow key to scroll up and down between maker
Maker selection: Use the arrow key to browse alphabets of car-makers, press the "Enter" key to select
Maker selection: Use the arrow key to browse automakers, press the "Enter" key to select
Model Selection: Use the arrow key to browse models, press the "Enter" key to select
This function is designed for you to bypass OBD II and automatically
duplicate an O.E Sensor.
Maker selection: Use the arrow key to select year and frequency and press the "Enter" key to select
Function selection: Use the arrow key to select new sensor and press the " Enter " key to select
Function selection: Use the arrow key to select auto duplicate and press the " Enter " key to select
NOTE - Duplicate and Program function will only work with CUB's Uni-sensor and Uni-sensor only.
Search ID Process: Sensor AID will now search the sensor ID, sensor respond time may vary depending on snesor type and brand. Sensor AID will beep after receving sensor information
Duplicate Sensor: Sensor AID will now display the O.E sensor ID, press the" Enter " key to program Uni-sensor.
Note: Once you get the sensor ID, press Enter key directly to program the new sensor. If you press Esc key, thesensor ID will be erased, you need to diagnose again.
Duplicate Complete: Sensor AID will now duplicate the sensor for you, following by Erasing Flash, Program sensor and Verifying, you will hear 2 short beeps when the sensor is duplicated.
Note: Duplicate and Program function will only work with CUB's Uni-sensor and Uni-sensor only.


產品客服中心免付費專線:0800-001-282 服務時間:10am-16pm
公司地址: 彰化縣福興鄉彰鹿路六段546巷6號    電話: 886-4-778-2010, 777-0256   傳真: 886-4-778-2009,  886-4-778-3867

Copyright © 2013 CUB ELECPARTS INC. All Rights Reserved.    電子信箱: sales@cubelec.com |  WEBmail  |  Supply Chain